How to Charge Your Vibrator with Mag-Connect Cable

By Honey Play Box Official | Published: 2026-10-23

Category: How-to Guides

Learn how to use the CH-07-01 Mag-Connect cable to charge your Honey Play Box vibrator. Step-by-step guide with common mistakes to avoid.

Quick answer

Use the CH-07-01 Mag-Connect cable by aligning the magnetic tip with the charging port on your compatible Honey Play Box vibrator. It clicks into place and charges without plugging or twisting.

Why use a magnetic charger?

Magnetic charging cables like the CH-07-01 eliminate the need to align tiny pins or force a plug into a port. This reduces wear on both the cable and your vibrator's charging port over time.

The cable is compatible with many Honey Play Box models including Rhea, Sylvia, Carnivore, Fiona, Pulse, Octopus, and more. Check your product manual to confirm compatibility.

Step-by-step charging guide

Check compatibility and clean the port: Ensure your vibrator is one of the models listed for the CH-07-01 cable. Wipe the charging port with a dry cloth to remove dust or lubricant residue. A dirty port can prevent the magnetic connection from making proper contact, leading to slow or no charging.
Connect the cable to a USB power source: Plug the USB end of the Mag-Connect cable into a USB wall adapter, computer port, or power bank. Do not use a fast-charging adapter unless the cable supports it. High-wattage chargers can damage the cable or battery. Use a standard 5V/1A adapter for best results.
Align the magnetic tip with the vibrator's port: Bring the magnetic connector close to the charging port on your vibrator. It will snap into place automatically if oriented correctly. Do not force it. If the magnet does not click into place, flip the connector 180 degrees — it only works in one orientation.
Wait for the charging indicator: Most Honey Play Box vibrators show a red or blinking light while charging and a green or steady light when fully charged. Refer to your model's manual for specific indicator behavior. If no light appears within 10 seconds, check the cable connection and power source.
Disconnect after full charge: Once the indicator shows full charge (usually 2-3 hours), pull the magnetic connector away from the port. Store the cable in a dry place. Overcharging can reduce battery lifespan. Unplug the cable once charging is complete.

Product facts

Charger Mag-Connect Cable (CH-07-01): The Mag-Connect cable (CH-07-01) is designed for Rhea, Sylvia, Freezer, Carnivore, Fiona, HABIKI, Pulse, Octopus, ALVINA, Moira, Sweetie, 3in1, Super Babe, Grandeur, BABE, ADA, ANGEL, Berry, Ark, Teresa, KING, Huntley, 2in1, Mua, Gray, Song, Lanco, Zeus, Tushie, Mermaid, Jaque, Deidre, Sajittas, Hi Fun, Silicone, Vine, Silver, Sparrow, Lovebud, Le Couplet, Squidy, DEMON, Lacy, Crave, Lamia, SUCCION, and more. This means you only need one cable for most Honey Play Box toys, simplifying your charging routine.
Charger Mag-Connect Cable (CH-07-01)